Antara Owners Club banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi I have a 57 Plate Antara and I'm trying to find the rear wheel alignment settings for it. I have some bad tyre wear on one of the rear tyres.Had the tracking checked and they said one was out but they couldn't find the data to set it to.
Thanks in advance for your time and input.
 

·
Registered
Joined
·
1,192 Posts
Do they have data on the captiva. ?
 

·
Registered
Joined
·
104 Posts
Front Wheel Adjustment
Camber -0 degrees 33' +_45' Max difference R/L = 1 degree
Caster 2 degrees 11' +_45' Max difference R/L = 1 degree
Toe-in 0 degrees 06' +_5' (positive values = toe-in, negative values = toe-out)
Toe-in variation with inner wheel deflection of 20 degrees. 0 degrees 21' +_2 degrees 30'
(inner wheel deflection of 20 degrees minus toe-in = outer wheel deflection)

Rear wheel adjustment

Camber -0 degrees 21' +_30' Max difference R/L = 1 degree
Toe-in 0 degrees 05' +_6' (positive values = toe-in, negative values = toe-out)
Deviation from geometric driving axis 0 degrees 00' +_9'

I hope this helps

Andy
 
1 - 3 of 3 Posts
Top