Antara Owners Club banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
hi all does anyone know if there should be a hole in the undertray to drain the engine oil, there appears to be a pre-marked panel where i would expect there to be a hole but it isn't cut out, is this meant to be cut out or do you have to remove the full undertray just to drain the oil, the filter is accessible from under the bonnet so don't need the undertray off for that??
 

·
Registered
Joined
·
1,197 Posts
No there isn't. I have seen this. If you want to drain the oil,you have to remove the undertray. It is quite easy. The sump plug is at 90 deg. so the oil comes out sideways and would go all over the tray.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top