Keith said:Had my SE for 2 days so possibly response is a bit premature but also not very impressed with sat nav in any respect. I will hang on to my TomTom just in case.
I have more or less given up on the Antara SatNav and bought a newGarmin Nuviwith freelifetime map updates. The cost of map updates for the Antara is more than the cost of a good stand alone unit.JFDM said:Keith said:Had my SE for 2 days so possibly response is a bit premature but also not very impressed with sat nav in any respect. I will hang on to my TomTom just in case.
I pick my SE NAV up at the end of this month but I have wondered at the thought process that went into positioning the device where it is.
I presume that there is audio directions and warnings on the NAV system so there isn't that much requirement to be constantly looking at it?
HoneyMonster, I must be thick what one is the RH rotary switch and what are the z- and z+one, what menus does it bring up.HoneyMonster said:To check version on SE NAV go into hidden menu.
<span style=": rgb249, 249, 249; color: rgb20, 20, 20; font-family: Tahoma, Georgia, serif; font-size: 15px; line-height: 20px;">With system switched on, press and hold in the setup button. Then the RH rotary switch (Z- Z+ one) rotate 4 clicks anticlockwise, 4 clicks clockwise then 4 clicks anticlockwise and a new menu will appear. Use the return button bottom right to come out of bits after you have looked in them.</span>
<span style=": rgb249, 249, 249; color: rgb20, 20, 20; font-family: Tahoma, Georgia, serif; font-size: 15px; line-height: 20px;">
</span>
<span style=": rgb249, 249, 249; color: rgb20, 20, 20; font-family: Tahoma, Georgia, serif; font-size: 15px; line-height: 20px;">You can then check which version number you have </span>
<span style=": rgb249, 249, 249; color: rgb20, 20, 20; font-family: Tahoma, Georgia, serif; font-size: 15px; line-height: 20px;">
</span>
<span style=": rgb249, 249, 249; color: rgb20, 20, 20; font-family: Tahoma, Georgia, serif; font-size: 15px; line-height: 20px;">![]()
</span>
HoneyMonster said:To check version on SE NAV go into hidden menu.
With system switched on, press and hold in the setup button. Then the RH rotary switch (Z- Z+ one) rotate 4 clicks anticlockwise, 4 clicks clockwise then 4 clicks anticlockwise and a new menu will appear. Use the return button bottom right to come out of bits after you have looked in them.
You can then check which version number you have
![]()
Hi, can't seem to access the hidden menu on mine. I have the same set up as this.
Any ideas?
Cheers
unclefunk said:HoneyMonster said:To check version on SE NAV go into hidden menu.
With system switched on, press and hold in the setup button. Then the RH rotary switch (Z- Z+ one) rotate 4 clicks anticlockwise, 4 clicks clockwise then 4 clicks anticlockwise and a new menu will appear. Use the return button bottom right to come out of bits after you have looked in them.
You can then check which version number you have
![]()
Hi, can't seem to access the hidden menu on mine. I have the same set up as this.
Any ideas?
Cheers
Ignore me, I was being thick![]()