Hi I've a 2012 2.2 diesel Antara that the cylinder head was taken of before lock down and has lay until now
We have built it back up and it now needs a starter.So we have replaced the starter,But the car still wont start until you disconnect the camshaft position sensor,yet there are no fault codes and we have checked the timing a dozen times which is all ok.Any thoughts
I cannot believe this has come up again, Gyislander had exactly the same problem, It is covered on another post called Antara non starter driving me nuts. However Gyislanders main source of information was another forum. Turned out to be misalignment on a sprocket when the engine was put back together.
Quite involved and takes some reading, best of luck. Richy