I have a 2.2 cdti 2013 .can anyone help. my fault code light came on while driving,lost power for a bit , and then cleared. It happened again the other day, and i turned the ignition on and off while i was driving, and it cleared , i haven't got access to a fault code reader yet. any ideas
My 2013 2.2l CDTi does the same. When cruising at about 70mph the engine warning lights come on & i suffer a small loss of power. If i stop & switch the engine off then on again, the warning lights go off. Very strange & irritating, especially when on the motorway. Any ideas?
I'm guessing when you turn the ignition off it resets the fault. But really you need to sort the root cause as it will more than likely get worse. I guess a code reader would be a good start, clear the codes then take for a drive and when it re-occurs recheck the codes and hopefully that may give you a clue to the problem. Richy
Just been having a look on Youtube and on Vauxhalls their is something called a pedal test. You put the key in the ignition (dont turn yet), depress the brake and accellerator pedels and hold them down then turn the ignition on with the key and your display between the clocks should read the ECU fault codes (assuming their are some). This doesn't work on my car but it may not have any fault codes.
They dont last long on the display so might be worth recording on your phone. You only need the first 4 digits on the display.
Can you guys let me know if this works on your Antara please. Richy